Oil shopping gets risky when the choice starts and ends with viscosity. Mobil 1 120760 0W-40 Full Synthetic Oil is a useful product-specific option for buyers who need a 0W-40 synthetic oil and can confirm that the vehicle calls for the right approvals.
The practical question is not whether 0W-40 is good oil in general. It is whether this Mobil 1 FS European Car Formula matches the vehicle owner's manual, the required industry specification, and any automaker approval listed for the engine.
What Parts Universe lists
Parts Universe currently lists this product as MOBIL 1 120760 0W-40 Full Synthetic Oil (5 Quart). The verified Shopify product record for this article shows:
- Parts Universe SKU: MBL-0W405Q
- Current Parts Universe price: $38.99
- Current status: active and available for sale
- Vendor: MOBIL OIL
- Product type: OIL PRODUCTS
- Featured image: active Shopify product image
What Mobil verifies
Mobil's official product page identifies Mobil 1 FS European Car Formula 0W-40 as an advanced full synthetic motor oil. Mobil says the formula is engineered for gasoline and diesel engine technology without particulate filters, and describes it as formulated for European vehicles with low-temperature start-up protection plus wear and deposit protection.
The official ExxonMobil U.S. product data sheet lists the grade as SAE 0W-40. Typical properties for Mobil 1 FS 0W-40 include kinematic viscosity of 78.3 mm2/s at 40 C and 13.8 mm2/s at 100 C, a 230 C Cleveland Open Cup flash point, and a -42 C pour point.
Approvals and specs to match
The U.S. PDS lists several approvals for Mobil 1 FS 0W-40, including BMW Longlife 01, GM dexosR, MB-Approval 229.3, MB-Approval 229.5, Porsche A40, VW 502 00, and VW 505 00. It also lists Mobil 1 FS 0W-40 as meeting or exceeding API SP, API SQ, ACEA A3/B4, Fiat 9.55535-M2, and Ford WSS-M2C937-A.
Treat those entries as a checklist, not a shortcut. If the owner's manual, underhood label, or service information calls for a different viscosity or a different builder approval, choose the oil that matches that requirement.
When this 0W-40 oil makes sense
- Your owner's manual allows SAE 0W-40 and calls for one of the approvals this product carries.
- You are servicing a gasoline or compatible diesel engine without a diesel particulate filter requirement that conflicts with this formula.
- You want one 5-quart container for an oil change or top-off inventory, while still confirming the engine's required fill quantity.
- You are comparing European-formula oils by builder approval instead of brand name alone.
When not to use it
- The vehicle requires a lower-SAPS oil, particulate-filter-specific oil, or a manufacturer approval not listed for this product.
- The cap or owner's manual calls for a different viscosity and does not allow 0W-40 for your climate or engine.
- The engine is a 2-cycle or aviation application; Mobil says this formula is not recommended there unless the manufacturer specifically approves it.
- You are trying to solve oil consumption, low pressure, or engine noise without diagnosing the mechanical cause.
Oil-change safety notes
- Work on a stable surface and support the vehicle correctly if it must be lifted.
- Let hot oil cool enough to handle safely, and wear gloves and eye protection.
- Use the correct drain-plug torque, replace the drain-plug washer when specified, and check for leaks after startup.
- Install a filter that matches the vehicle application and oil-change interval.
- Recycle used oil and filters through an approved collection point.
Related Parts Universe links
- Shop Mobil 1 120760 0W-40 Full Synthetic Oil
- Browse Mobil products
- Browse oil and additives
- Browse all Parts Universe products
For buyers, the main takeaway is straightforward: Mobil 1 0W-40 is a strong candidate only when the vehicle calls for its viscosity and listed approvals. Start with the owner's manual, confirm the approval line, then order by exact product and container size.
