MON – FRI
08:00am – 17:00pm
SAT – SUN
08:00am – 17:00pm
DESCRIPTION
PlasticWeld™ is a specially formulated two-part adhesive and epoxy filler system that provides for strong, lasting repairs. PlasticWeld™ will bond a variety of surfaces, such as metal, composites, fiberglass and others. PlasticWeld™ sets in 5 minutes at room temperature and is fully cured in 1 hour. Using a 1:1 mixing ratio, PlasticWeld™ combines to a tensile strength of 3900 PSI and cures to an off-white color.
APPLICATIONS
| GREAT FOR: | USE ON: |
| Most Hard Plastics | Automotive |
| ABS | Ceramic |
| Fiberglass | Plastic/Composite/PVC |
| PVC | Fiberglass |
| Glass | And more applications |
| Vinyl | |
| Most Composites |
INSTRUCTIONS
1. Prepare: Clean repair area of dirt, grease, oil, paint, rust, etc.
2. Mix: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
4. Dry: Set in 5 minutes. Cures in 1 hour. If temperature is below 40 degrees F, then set time is longer.
SPECIFICATIONS
| Strength | 3900 PSI |
| Set Time | 5 Minutes |
| Cure Time | 1 Hour |
| Cure Color | Off White |
RESOURCES
Latest products
Customers Also Bought
-33%
