MON – FRI
08:00am – 17:00pm
SAT – SUN
08:00am – 17:00pm
Support & Order
DESCRIPTION
MarineWeld™ is a specially formulated two-part epoxy cold weld system that provides for strong, lasting repairs for bonding different or similar surfaces, such as aluminum, metal, composites, fiberglass and others. MarineWeld™ sets in 4-6 hours at room temperature and is fully cured to a dark grey color in 15-24 hours. Once cured, it can be shaped, tapped, filed, sanded and drilled and will retain its strength above or below the waters' surface. MarineWeld™ has a 1:1 mixing ratio and tensile strength of 5020 PSI.
APPLICATIONS
GREAT FOR: | USE ON: |
Boat |
Fiberglass |
Personal Watercrafts |
Under Water / Wet |
In/Outboard Engines |
And more |
Deck & Hull Accessories | |
Rust Damage | |
Household Repairs |
INSTRUCTIONS
1. Prepare: Clean repair area of dirt, grease, oil, paint, rust, etc.
2. Mix: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
4. Dry: Set in 5 minutes. Cures in 1 hour. If temperature is below 40 degrees F, then set time is longer.
Strength | 5020 PSI |
Set Time | 4 ~ 6 Hours |
Cure Time | 15 ~ 24 Hours |
Cure Color | Dark Gray |
RESOURCES
No matter whether you’re doing basic
repairs and maintenance, modifying your car’s
street appeal and performance, or adding
high-tech lighting
Email: info@mypartsuniverse.com
20475 Yellow Brick Rd, STE 3C-3D
Walnut, CA 91789