Delivery info

Delivery is generally
within 2-10 days, depending
on your location.

30 days returns

Return will not accepted if the product is opened or after use. All returns requests need to be within 30 days of when the original order was received. Original shipping costs will not be refunded.


* 8 x DT 2-Pin Gray Connector Set
* 4 x DT 3-Pin Gray Connector Set 
* 4 x DT 4-Pin Gray Connector Set 

* 20 x 14AWG Red GPT Crimped Wires Set (Male & Female) 
* 20 x 14AWG Black GPT Crimped Wires Set (Male & Female) 
* 10 x 14AWG White GPT Crimped Wires Set (Male & Female) 
* 10 x 14AWG Green GPT Crimped Wires Set (Male & Female) 



  • 100% Original Genuine Deutsch Products ( by TE Connectivity)
  • Designed for Industrial & Industrial use 
  • Stand up to the harsh environmental challenges
  • Made in the USA



Deutsch DT connectors pigtail kits are designed for harsh environment applications. Each contact carries a 13 A continuous capacity, filling the design requirements for multi-pin connections. The connectors are made of rugged thermoplastic and feature silicone rear wire and interfacial seals that allow the connectors to withstand conditions of extreme temperature and moisture. For multi-pin applications that are exposed to harsh environments, DEUTSCH's DT connectors are a reliable and proven solution.




Temperature:               Operating at temperatures from -55° C to +125° C continuous at rated current.

Durability:                     No electrical or mechanical defects after 100 cycles of engagement and disengagement.

Vibration:                       No unlocking or unmating and exhibits no mechanical or physical damage after sinusoidal vibration levels of 20 G’s at 10 to 2000 Hz in each of the three mutually perpendicular planes.

Physical Shock:           No unlocking, unmating, or other unsatisfactory result during or after 50 G’s in each of three mutually perpendicular planes. No electrical discontinuities longer than 1 microsecond. MIL-STD 202, Method 213, Condition “C”.

Fluid Resistance:         Connectors show no damage when exposed to most fluids used in industrial applications.

Insulation Resistance:   1000 megohms minimum at 25° C.

Moisture Resistance:  Properly wired and mated connections will withstand immersion under three feet of water without loss of electronic qualities or leakage.

Dielectric features:     Current leakage less than 2 milliamps at 1500 VAC       

Thermal Cycle:             No cracking, chipping or leaking after 20 test cycles from -55° C to +125° C.



Added to cart successfully!