Oil and grease are not always the right answer. In dusty, gritty, high-temperature, or petroleum-sensitive spots, a wet lubricant can hold debris, migrate away from the target area, or leave a residue the job does not need. That is where a dry graphite film can make sense.

CRC 03094 Dry Graphite Lube is a buyer-focused option for shoppers who need a dry-film lubricant instead of a general-purpose oil or grease. CRC positions it for dry, high-temperature, non-petroleum lubrication, and Parts Universe currently carries it as an active, available product.

What Parts Universe lists

Parts Universe currently lists this item as CRC Industries 03094 Dry Graphite Lube 10 OZ. The active Shopify product record verified for this article shows:

  • Parts Universe SKU: CRC-03094
  • Manufacturer item number: 03094
  • UPC: 078254030944
  • Current Parts Universe price: $11.99
  • Current inventory: 252 units
  • Current status: active and available for sale

What CRC verifies

CRC's official product page identifies this product as Dry Graphite Lube, item number 03094, with a 10 wt oz net fill in a 16 ounce aerosol container. CRC lists the product lifecycle status as active and gives UPC 078254030944.

CRC's specifications and lubricant guide also frame the product as a dry film lubricant for jobs where petroleum products should be avoided, with resistance to dirt, dust, and oil buildup. Key CRC-listed attributes include:

  • Film type: dry
  • Appearance: black liquid before drying
  • Curing time: 10 to 15 minutes
  • Working temperature: 400 F continuous / 850 F intermittent
  • Plastic safe: no
  • CPSC flammability class: extremely flammable
  • Removal: petroleum solvents

When dry graphite makes sense

CRC 03094 is worth considering when the job calls for lubrication without a wet, oily film. Practical examples include high-temperature sliding points, light-load or high-rpm slides, rollers, gears, chains, hoists, transfer belts, conveyor belts, motors, plant machinery, and rubber moldings when those uses match the equipment maker's guidance.

The core buyer question is not "is graphite better?" It is "does this location need a dry, non-petroleum film?" If the part needs tack, corrosion protection from a wet film, water wash resistance from a grease, or a material-safe formula for plastics, choose the product that matches that requirement instead.

Five checks before using it

  1. Confirm material compatibility. CRC lists this item as not plastic safe. Do not assume it belongs on plastic trim, plastic rollers, or mixed-material assemblies without manufacturer approval.
  2. Match the temperature requirement. CRC lists 400 F continuous and 850 F intermittent working temperature, but the surrounding part, coating, seal, and substrate still have their own limits.
  3. Decide whether a dry film is desired. Dry graphite is useful where dust attraction or oil migration is a problem. It is not a substitute for every grease point.
  4. Check the service manual. If the equipment maker calls for a specific lubricant chemistry, use that instruction first.
  5. Plan cleanup and masking. CRC lists black liquid appearance and petroleum-solvent removal. Keep overspray away from finished surfaces, friction surfaces, belts, glass, upholstery, and paint unless the label and service information allow it.

Safety notes

  • Read and follow the product label and SDS before use.
  • Use with ventilation and keep the aerosol away from sparks, flames, hot work, and other ignition sources.
  • Do not spray near brake friction surfaces, tire tread, pedals, steering-wheel grips, or other surfaces where reduced friction would create a hazard.
  • Let the film cure before returning equipment to service when the application requires a dry film.
  • When in doubt, test in a small, non-critical area or use the equipment maker's specified lubricant.

Good fit, bad fit

Good fit: the job calls for a dry, graphite-based, non-petroleum film; the materials are compatible; the temperature range is appropriate; and a black dry-film residue is acceptable.

Bad fit: the job involves plastic-sensitive parts, visible trim where staining matters, friction surfaces that must stay clean, or a service procedure that specifies oil, grease, silicone, PTFE, or another chemistry.

Related Parts Universe links

CRC 03094 is a focused choice for buyers who already know they need a dry-film lubricant. Match the surface, temperature, and service requirement first; then use the product where a dry graphite film solves a specific lubrication problem better than oil or grease.